WIP nabu rodriguezst configs - #2
Draft
onesaladleaf wants to merge 6 commits into
Draft
onesaladleaf wants to merge 6 commits into
onesaladleaf wants to merge 6 commits into
Conversation
onesaladleaf
force-pushed
the
rodriguezst-configs
branch
from
May 9, 2026 18:59
d081f6d to
4f1eed8
Compare
gmankab
pushed a commit
that referenced
this pull request
Aug 10, 2026
RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the physical-address domain. Commit 476849b ("riscv/mm: align vmemmap to maximal folio size") attempted to account for the maximal folio alignment by feeding MAX_FOLIO_VMEMMAP_ALIGN directly into VMEMMAP_ADDR_ALIGN. However, MAX_FOLIO_VMEMMAP_ALIGN is measured in bytes of struct page storage, whereas VMEMMAP_ADDR_ALIGN is used to align a physical address. The mask-based compound_info encoding requires pfn_to_page(0) to be naturally aligned to MAX_FOLIO_VMEMMAP_ALIGN. Commit 9f94db4 ("mm/sparse: check memmap alignment for compound_info_has_mask()") added a check for that requirement and exposed the unit mismatch on systems such as QEMU virt, where the DRAM base is not aligned to MAX_FOLIO_NR_PAGES * PAGE_SIZE. Here is the log: [ 0.000000][ C0] ------------[ cut here ]------------ [ 0.000000][ C0] WARNING: mm/sparse.c:365 at sparse_init+0x58a/0x6fe, CPU#0: swapper/0 [ 0.000000][ C0] Modules linked in: [ 0.000000][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.2.0-rc3-g1d8304bdd65f #2 PREEMPT [ 0.000000][ C0] Hardware name: riscv-virtio,qemu (DT) [ 0.000000][ C0] epc : sparse_init+0x58a/0x6fe [ 0.000000][ C0] ra : sparse_init+0x58a/0x6fe [ 0.000000][ C0] epc : ffffffff86851c88 ra : ffffffff86851c88 sp : ffffffff88807a30 [ 0.000000][ C0] gp : ffffffff8a3bf240 tp : ffffffff88842080 t0 : ff600000ffab6000 [ 0.000000][ C0] t1 : 000000017fab6000 t2 : 65203a6573726363 s0 : ffffffff88807bc0 [ 0.000000][ C0] s1 : 000000000e000000 a0 : 0000000000000007 a1 : 0000000000000000 [ 0.000000][ C0] a2 : 0000000000000002 a3 : ffffffff86851c88 a4 : 0000000000000000 [ 0.000000][ C0] a5 : ffffffff88843080 a6 : 0000000000000003 a7 : 0000000000000000 [ 0.000000][ C0] s2 : ff60000000000000 s3 : 0040000000000000 s4 : 0004000000000000 [ 0.000000][ C0] s5 : ffffffff8a4d92e0 s6 : ff600000ffab55e0 s7 : ffffffff88384d00 [ 0.000000][ C0] s8 : 0000000000000003 s9 : ffffffff88384cc1 s10: ffffffff88384cc0 [ 0.000000][ C0] s11: ffffffff8a4daae0 t3 : ffffffff915e8b20 t4 : ffffffff915e8b20 [ 0.000000][ C0] t5 : ffffffff915e8b20 t6 : ffffffff915e8bc8 ssp : 0000000000000000 [ 0.000000][ C0] status: 0000000200000100 badaddr: ffffffff86851c88 cause: 0000000000000003 [ 0.000000][ C0] [<ffffffff86851c88>] sparse_init+0x58a/0x6fe [ 0.000000][ C0] [<ffffffff8683d396>] mm_core_init_early+0x116/0x1e30 [ 0.000000][ C0] [<ffffffff86801edc>] start_kernel+0xd2/0x848 Convert MAX_FOLIO_VMEMMAP_ALIGN to the equivalent physical alignment before using it in VMEMMAP_ADDR_ALIGN. This keeps the existing round_down() logic while making the resulting vmemmap base satisfy the mask-alignment requirement. Link: https://lore.kernel.org/20260716115326.3466926-1-xujiakai2025@iscas.ac.cn Fixes: 476849b ("riscv/mm: align vmemmap to maximal folio size") Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn> Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: David Hildenbrand <david@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nam Cao <namcao@linutronix.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Assisted-by: YuanSheng:DeepSeek-V4-Flash Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gmankab
pushed a commit
that referenced
this pull request
Aug 10, 2026
[BUG] There is a bug report that on 32bit systems (i686), btrfs crashes when trying to do zstd compression: BUG: unable to handle page fault for address: fffbc000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page CPU: 0 UID: 0 PID: 61 Comm: kworker/u8:5 Tainted: G N 7.2.0-rc3-P3 #2 PREEMPTLAZY Hardware name: LENOVO 2007F2G/2007F2G, BIOS 79ETE7WW (2.27 ) 03/21/2011 Workqueue: btrfs-delalloc btrfs_work_helper EIP: ZSTD_compressStream2+0x221/0x5fc Call Trace: ZSTD_compressStream+0xd/0x48 zstd_compress_stream+0x8/0x10 zstd_compress_bio+0x20a/0x564 btrfs_compress_bio+0x94/0xc0 compress_file_range+0x20a/0x380 btrfs_work_helper+0xc1/0x1b4 process_scheduled_works+0x15f/0x204 worker_thread+0x10c/0x178 kthread+0xe1/0xe8 ret_from_fork+0x1d/0x14c ret_from_fork_asm+0x12/0x18 entry_INT80_32+0xf0/0xf0 CR2: 00000000fffbc000 ---[ end trace 0000000000000000 ]--- [CAUSE] Inside zstd_compress_bio(), we assume the whole page cache folio can be mapped in one go. However that assumption is not true on systems with CONFIG_HIGHMEM, the pages of the large folio can be in HIGHMEM, which needs to be mapped before access. Meanwhile zstd_compress_bio() only map the page of a large folio where the start filepos is, the remaining pages are not mapped, and accessing the remaining pages will trigger the above crash. [FIX] Do not enable large folios when the kernel has CONFIG_HIGHMEM enabled. This is the same handling for bs > ps support. Link: kdave/btrfs-progs#1146 Reported-by: Erhard Furtner <erhard_f@mailbox.org> Fixes: 9bce95e ("btrfs: move large data folios out of experimental features") Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
gmankab
pushed a commit
that referenced
this pull request
Aug 31, 2026
rt6_nh_dump_exceptions() uses hlist_for_each_entry() to iterate over
RCU-protected exception lists. The caller holds rcu_read_lock(), but does
not hold rt6_exception_lock, so rt6_insert_exception() can concurrently
add an entry with hlist_add_head_rcu().
KCSAN reports this race (irrelevant details omitted):
==================================================================
BUG: KCSAN: data-race in rt6_insert_exception / rt6_nh_dump_exceptions
write (marked) to 0xffff8a7c44c59620 of 8 bytes by interrupt on cpu 5:
rt6_insert_exception+0x3bb/0x760
__ip6_rt_update_pmtu+0x4fe/0x750
ip6_sk_update_pmtu+0x19a/0x3b0
udpv6_err+0x3ff/0x800
icmpv6_notify+0x1e1/0x440
icmpv6_rcv+0x8c0/0xab0
ip6_protocol_deliver_rcu+0x616/0x840
ip6_input_finish+0xb9/0x160
...
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff8a7c44c59620 of 8 bytes by task 549 on cpu 14:
rt6_nh_dump_exceptions+0xb3/0x260
rt6_dump_route+0x53e/0x5f0
fib6_dump_node+0x6d/0xf0
fib6_walk_continue+0x290/0x2d0
fib6_dump_table+0x28d/0x360
inet6_dump_fib+0x37d/0x620
rtnl_dumpit+0x7b/0xd0
netlink_dump+0x3ae/0x7e0
...
entry_SYSCALL_64_after_hwframe+0x77/0x7f
4 locks held by dumper/549:
...
#1: (rcu_read_lock){....}-{1:3}, at: inet6_dump_fib+0x88/0x620
#2: (&tb->tb6_lock){+.-.}-{3:3}, at: fib6_dump_table+0x1e9/0x360
#3: (rcu_read_lock){....}-{1:3}, at: rt6_dump_route+0x483/0x5f0
value changed: 0xffff8a7c44e05700 -> 0xffff8a7c45d60100
Reported by Kernel Concurrency Sanitizer on:
CPU: 14 UID: 0 PID: 549 Comm: dumper Not tainted
7.2.0-rc7-virtme #38 PREEMPT(lazy)
...
Use hlist_for_each_entry_rcu() to safely iterate over the exception list.
Fixes: 1e47b48 ("ipv6: Dump route exceptions if requested")
Cc: stable@vger.kernel.org
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260815084651.69477-1-sigefriedhyy@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gmankab
pushed a commit
that referenced
this pull request
Aug 31, 2026
…ommands' Tariq Toukan says: ==================== net/mlx5: Preserve speed and state across vport modify commands The firmware vport modify command bundles both admin state and max tx speed in a single operation, which requires each side to preserve the other field when it only intends to change one. When modifying max tx speed, the driver already queries the current admin state and passes it back to avoid overwriting it. However, this query and the subsequent modify were not atomic, a state change between the two could cause the modify to overwrite the new state with a stale value. The fix holds esw->state_lock across the query-modify sequence. When support for setting max tx speed via the vport modify command was introduced, the existing admin state modify path was not updated to preserve the current speed. As a result, the firmware interprets the zero speed field as an intentional reset. The fix adds a speed query before the state modify and passes the result back in the command. To support that, mlx5_query_vport_max_tx_speed() had to be fixed first: it was returning zero whenever the vport was DOWN, which was correct for the query_port_speed verb but would defeat the purpose of querying before a state modify. The DOWN-to-zero logic is moved to the verb-layer caller so the function returns the raw firmware value. Patch #1 holds esw->state_lock across the state query and modify in the speed modify path Patch #2 moves the vport DOWN zero mapping to the verb-layer caller so the query returns the raw firmware value Patch #3 queries current max tx speed before modifying vport state to preserve it ==================== Link: https://patch.msgid.link/20260816065015.3280733-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gmankab
pushed a commit
that referenced
this pull request
Aug 31, 2026
The `rustc-dev` components for Rust 1.82.0 through 1.87.0 include a
precompiled `zerocopy_derive` procedural macro in the sysroot. This
range includes Rust 1.85.0, our minimum supported version.
This makes `rusttest` fail because the compiler finds both the sysroot
copy and the copy built in `rust/test`:
error[E0464]: multiple candidates for `dylib` dependency `zerocopy_derive` found
--> rust/kernel/prelude.rs:70:9
|
70 | pub use zerocopy_derive::{
| ^^^^^^^^^^^^^^^
|
= note: candidate #1: .../lib/rustlib/x86_64-unknown-linux-gnu/lib/libzerocopy_derive-54d2b38896fa6bc5.so
= note: candidate #2: .../rust/test/libzerocopy_derive.so
Commit fe39a23 ("rust: kbuild: disambiguate `zerocopy` for
`rusttest`") fixed the equivalent ambiguity for `zerocopy`.
Thus point to the dependency explicitly in this case too.
Cc: Antoni Boucher <bouanto@zoho.com>
Cc: stable@vger.kernel.org
Fixes: 5060549 ("rust: zerocopy-derive: enable support in kbuild")
Link: https://patch.msgid.link/20260823193529.156066-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
gmankab
pushed a commit
that referenced
this pull request
Aug 31, 2026
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and the next software segmentation point - udp_rcv_segment() on local delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow path - hands it to skb_segment(). skb_segment()'s frag_list walk assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to a tap by an unprivileged user in its own userns are enough: kernel BUG at net/core/skbuff.c:4899! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2 RIP: 0010:skb_segment+0x20ca/0x48b0 Call Trace: <TASK> __udp_gso_segment+0x29a/0x27d0 udp4_ufo_fragment+0x458/0x6c0 inet_gso_segment+0x429/0x1340 skb_mac_gso_segment+0x233/0x4f0 __skb_gso_segment+0x308/0x660 udp_queue_rcv_skb+0x440/0xad0 udp_unicast_rcv_skb+0xc7/0x2c0 udp_rcv+0x16ce/0x2260 ip_protocol_deliver_rcu+0x197/0x2d0 ip_local_deliver+0x430/0x690 ip_rcv+0x16f/0x1f0 __netif_receive_skb_one_core+0x15e/0x1c0 __netif_receive_skb+0x1e/0x110 netif_receive_skb+0xf6/0x5c0 tun_rx_batched.isra.0+0x3ab/0x790 tun_get_user+0x17c3/0x3550 tun_chr_write_iter+0xba/0x1b0 vfs_write+0x646/0x1130 </TASK> Kernel panic - not syncing: Fatal exception in interrupt This runs with BH disabled, so it is a panic rather than an oops. The same is reachable with CAP_NET_RAW in a netns where a defrag point precedes a GSO point, and from a guest whose VMM forwards virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by commit 3dcbdb1 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") and by commit 9e4b7a9 ("net: gso: fix panic on frag_list with mixed head alloc types") do not cover it: page-backed heads skip them, and kmalloc heads skip them when gso_size == skb_headlen(head), which the sender controls. An skb entering a frag queue is an IP fragment by definition and cannot legitimately carry GSO state: GRO does not merge fragments and the stack segments before it fragments, so only untrusted sources are affected. This has been reachable since commit f43798c ("tun: Allow GSO using virtio_net_hdr"), the first path that let userspace attach GSO metadata to an IP fragment. Reset the GSO fields of every fragment as it is queued, in inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and 6lowpan reassembly share; then neither the head nor the frag_list members of the reassembled skb carry them (the members matter too: the ip_do_fragment()/ip6_fragment() fast paths send them out as they are). The head may remain CHECKSUM_PARTIAL; that is already accepted on receive and resolved by skb_checksum_help() in ip_do_fragment()/ip6_fragment() on forward. Tested on top of net.git (dc4b95b), x86_64: the tap reproducer above, two further IPv4 frag_list geometries that reach BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6 fragment-header variant (udp6_ufo_fragment()) each panic the unpatched kernel; with this patch all four datagrams are delivered intact and nothing is logged. Fixes: f43798c ("tun: Allow GSO using virtio_net_hdr") Cc: stable@kernel.org Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xinyang Ge <xinyang@anthropic.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/937926e509f2acd8e0e66520dc2b30fd6b4d1687.1787839506.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.